Category
1
Lathes
1.1
Universal center lathes
1.2
CNC lathes
1.3
Vertical turning lathes
1.4
Turning-milling centres
2
Horizontal boring and milling machines
2.1
Table type
2.2
Floor type
3
Milling machines
3.1
Toolroom machines
3.2
Knee - type machines
3.3
Bed and gantry type
3.4
Graphite milling machines
4
Grinding machines
4.1
Cylindrical grinding machines
4.2
Surface grinding machines
5
Drilling machines
5.1
Bench drilling machines
5.2
Radial drilling machines
6
Machining centres
6.1
Vertical machining centres
6.2
Vertical machining centres 3 axes
6.3
Vertical machining centres 5 axes
6.4
Horizontal machining centres
6.5
Horizontal machining centres 5axes
7
Gear cutting machines
7.1
Gear hobbing machines
7.2
Gear shaping machines
8
Press machines
8.1
Universal press
8.2
Eccentric press
8.3
Press brakes
8.4
Forging presses
9
Special machines
9.1
Equipment for scrab cutting
10
Special technologies
10.1
Cold roll heardening machine

SPH 50 / D / DS

SPH 50 / D / DS
SPH 50 - this cnc lathe is equipped with two independent-controlled turrets enabling machining with two tools at the same time. The tool turrets are situated on the upper bed guideways. They are oriented with tool plates to face each other in a mirrored way.
Request

CNC lathe SPH 50, SPH 50D and SPH 50DS

SPH 50 – this cnc lathe is equipped with two independent-controlled turrets enabling machining with two tools at the same time. The tool turrets are situated on the upper bed guideways. They are oriented with tool plates to face each other in a mirrored way. The turrets are 8-position in the SPH 50, or 12-position in the SPH 50D and SPH 50 DS. They are electrically controlled and the SPH 50 D and SPH 50 DS can additionally use driven tools. The left turret enters the space above the headstock, the right one above the tailstock. Travels in the Z axis partially overlap, however, the minimum distance between the turret flange faces is 400 mm in the SPH 50, (320 mm in the SPH 50 D and SPH 50 DS).

Strojimport