Universal center lathe SUA 150 NUMERIC

The universal center lathe SUA 150 Numeric is a numeric controlled machine designed for roughing and finishing of soft-parts and flanges, threading, boring, turning of tapers and various cylindrical parts. The output 37 kW (or as a special option 22 kW) allows heavy duty turning of items weighting up to 6000 kg without steady rest and up to 8000 kg with steady rest. Our standard version is delivered with distances between centres are 2000, 3000, 4000, 5000, 6000, 8000 mm and on customer‘s request up to 20 000 mm.

The machine has the rigid horizontal bed of design with hardened and ground guideways. The counter surfaces of saddle are covered with slide plastics Turcite B to prevent the stick-slip effect at small feeds.

Control system:

Universal center lathe SUA 150 Numeric with cycle control can be equipped with control system of your choice as from company FAGOR, HEIDENHAIN, SIEMENS.

The spindle drive is derived from asynchrony motor which is controlled by frequency regulator. The spindle revolutions are infinitely variable in all three ranges shifted hydraulically.

The drive is  longitudinal feed – axis Z – is done by servodrive mounted directly on the ballscrew. On the longer lathes over 5000 mm the drive is through the apron which contains two pre-loaded pinions with backlash elimination, which drive a rack. The drive of cross feed – axis X – is again by servodrive directly on the cross ballscrew. The measuring of both axes  is provided by rotary sensors placed on servodrives. On machines with longer distance between centres is the axis Z measured directly by of linear rule. The lubrication of gears in spindlestock, hydraulic operation of spring spindle brake and speed shifters is provided by lubrication and hydraulic unit placed on the rear side of the bed. The monitor and control board of control system is integrated into box and placed in front of the guard where are also placed two electronical hand wheels. The machine can be equipped with either hand operated tool head or with multi position CNC controlled turret head of various manufactures. Also, the machine can be equipped with chip conveyor as well as other extra accessories according to customer‘s requirement incl. The electrical equipment and control system are in the switchboard placed near to operator.

Machine safety:

Full covering -The machine is  covered by compact rear wall and with moving front door.

Safety of the operator is guaranteed by protecting guards. The opening guards are equipped with safety switches. The machine conforms the security instructions and requirements for CE mark.

Does this model not meet your needs? We also have smaller option. More information to be found in our catalogue. The manufacturer reserves the right to change the product parameters and design without prior notice.